+86-571-82202632                                      hito-auto@hitopec.com
You are here: Home / News / Industry News / What are the connection methods for container locks?

What are the connection methods for container locks?

Views: 1     Author: Site Editor     Publish Time: 2020-03-06      Origin: Site

What are the connection methods for container locks?

Container lock and body connection methods have a variety of, some are directly welded to the body, the lock can only rotate but not vertical movement, this is called fixed; This is called lifting, and there are turn locks that are articulated on the body or made to be moved, so that the fastening position can be dispatched, and then greatly improve the utilization rate of the vehicle, and there is a type of inlet-type transfer lock, the locking shaft like an insert into the fixed part of the box, usually in collaboration with other types of translocks.What are the connection methods for container locks

When the container is hoisted to the vehicle carrier surface, so that the angle hole at the bottom of the container falls just in the position of the device lock, through the rotary transfer lock handle, the lock will be fixed in a regular corner position (usually 90 degrees or 70 degrees), so that the transfer lock in the lock state. For the lift-off lock, the vertical push handle enables the lock head to lift, extend into the inner cavity of the bottom corner of the container, and then rotate to the rule point of view to make it lock the container angle. Some turn locks with a screwing device, through the screw can make the lock head down to press the bottom of the inner cavity of the angle, to prevent the box corner from lifting, so as to ensure that the lock more safe and reliable.

With the continuous improvement of modern manufacturing skills, the manufacturing process of container locks is becoming more and more perfect. The company on raw materials, production management, product inspection and other key links to ensure product quality. The main characteristics of the product are: convenient operation and sensitive, high safety and reliability, long life. After the product is treated on the surface, the part surface has high corrosion resistance, heat resistance, salt atomization and other characteristics, which can meet the conditions of use in coastal areas and in hot and humid climate. Products in addition to looking at the appearance, but also to pay attention to the quality of connotation, the internal quality of the transfer lock control is extremely severe, parts of the material of the physical and chemical functional test to meet the relevant standards, lock shaft also through the severe anti-pull test needs.

Over the years, container vehicles have been skidding, and some have even caused casualties. Mostly because some drivers figure hard, there is no roll lock on the handle, turn lock fixed equipment is the same as the false.

PRODUCT CATEGORY

QUICK LINKS

CONTACT US

   HITOAUTO

  +86-571-82202632

  +86-571-82202637

  hito-auto@hitopec.com
  Add: 50# Xiangdong Village,Yiqiao,Xiaoshan District,Hangzhou,Zhejiang,China.

QR-CODE

Copyright  2019 HITO AUTO (HANG ZHOU) CO., LTD